Scion iM Throttle Controller (2015–2016) | Roar 4X4

Scion iM Throttle Controller (2015–2016) — Roar 4X4

Is this your Scion iM (2015–2016)?

The Scion iM is listed on the factory plug list for 2015–2016. It may not have been sold new in Australia, so imported or overseas-spec vehicles should check the plug closely. Match the accelerator-pedal connector to the plug photo before ordering.

• Scion iM, 2015–2016.
• 2015–2016 · All models · petrol
• Plug: Plug Type 830. The factory plug list gives Plug 830 for the Scion iM 2015–2016, all engines.

Not this page: This page is limited to the Scion iM, 2015–2016; match the plug before ordering.

Sharpen the pedal response of your Scion iM (2015–2016) with the Roar 4X4 Performance Throttle Controller. This plug-and-play unit reduces throttle lag and makes the pedal feel more responsive. Designed for everyday commuting, highway and country driving, this controller sharpens how your iM responds on the road.

Product Specifications

Vehicle Compatibility — Does This Fit My iM?

Check the compatibility table above to confirm this throttle controller fits your exact vehicle. Not listed? Contact our team or use our Vehicle Compatibility Finder.

Key Features

• ✅ Sharper Pedal Response: reduces the delay you feel when you press the pedal
• ✅ 6 Driving Modes — Economy, Off, Comfort, Sport, Race, and Auto to suit any driving condition
• ✅ 9 Sensitivity Levels — Fine-tune throttle response to your exact preference
• ✅ AI Learning Mode — Adapts to your driving style over time for optimal performance
• ✅ Anti-Theft Security Mode — Reduces throttle input to prevent unauthorised vehicle use
• ✅ Day/Night Sensor — Auto-brightness control for safe, glare-free viewing
• ✅ Transmission Settings — Manual (HHH) or Auto (AAA) modes for precise control
• ✅ Quick Race Mode: long-press the M button to switch straight to Race Mode
• ✅ 100% Plug & Play — No cutting, no splicing, no tools required. Plug Type 830 pre-matched for your iM

Why Fit a Throttle Controller to Your Scion iM?

Modern drive-by-wire vehicles like the Scion iM use electronic throttle control, which introduces a factory-programmed delay between pressing the accelerator and engine response. This "throttle lag" is most noticeable when merging, overtaking or pulling away from the lights.

The Roar 4X4 Throttle Controller changes how the pedal signal is sent, so the pedal feels more responsive. It doesn't increase horsepower or torque. It changes how quickly the pedal responds.

What's in the Box

• ✅ Roar 4X4 Performance Throttle Controller Unit — With LCD display
• ✅ Vehicle-Specific Wiring Harness — Plug Type 830 for Scion iM
• ✅ Mounting Bracket & Adhesive Pad — For dashboard mounting
• ✅ Fitting Instructions — Universal installation guide

Confirm your plug — please check your plug type as per the picture

Before you install, match the plug-face photo in the gallery to the connector on your accelerator pedal. Pin layout, housing shape, and lock colour must match. Then download the installation instructions for verification. If you are unsure, contact support with a clear photo of your plug before ordering.

• Please check plug type according to your vehicle.
• Please check your plug type as per the picture before install.
• Unplug the pedal connector and compare pin layout / housing / lock colour.
• Download installation instructions for verification: TC instruction manual (PDF).
• If it does not match, or you are unsure, contact support with a clear photo of your plug.

Fitting Instructions — Throttle Controller Installation

Installation is a very simple plug-and-play process.

1. Locate Throttle Pedal: Find the electronic connector on your iM's accelerator pedal — it's the plug at the top of the pedal.
2. Plug In Controller: Disconnect the factory connector. Plug the Roar controller (Plug 830) between the pedal and factory harness.
3. Mount & Drive: Secure the display on your dashboard. Start your iM and select your preferred driving mode. Done!

Installation is the same for all vehicles — simply match the plug type to your accelerator pedal connector. No cutting, splicing, or tools required. Fully reversible — remove anytime to return to factory settings.

Frequently Asked Questions — Scion iM Throttle Controller

How do I know Plug Type 830 is correct for my iM?

Plug Type 830 is the factory-listed plug for the Scion iM (2015–2016). The connector is specifically designed to match your vehicle's electronic throttle pedal. Please check plug type according to your vehicle — if you're unsure, contact our team with your vehicle details and a photo of your pedal plug.

Does it increase power or just throttle response?

The throttle controller adjusts how quickly your iM's existing power is delivered — it does not increase horsepower or torque. It changes the pedal signal so the response feels quicker. Engine output does not change.

Is it good for everyday driving in my iM?

Yes. Sport mode gives sharper response when merging and overtaking, and Economy mode smooths out throttle delivery on long highway drives.

Is it compatible with aftermarket ECU tunes or chips?

Yes. The throttle controller works independently of ECU tunes, performance chips, or exhaust modifications. It complements these upgrades by giving you finer control over throttle delivery.

What does Anti-Theft Mode do?

Anti-Theft Mode dramatically reduces throttle input, making the vehicle very difficult to drive. This provides an additional layer of security against unauthorised use of your iM.

Shipping & Returns

📦 Shipping: Free shipping on throttle controllers within Australia. In-stock items typically dispatch within 2–5 business days. Allow 2–14 business days in transit depending on location. Australia only — we do not ship to P.O. boxes. Shipping for other products is calculated at checkout.

↩️ Returns & Warranty: Covered by our 12-month warranty, in addition to your rights under Australian Consumer Law, which can continue after it ends. Change of mind: you can return this throttle controller within 30 days of delivery if it is in as-new condition (no scratches, grease or adhesive), complete and in its original packaging. You pay the return freight. If it arrives faulty, damaged or incorrect, email admin@roar4x4.com with your order number and photos, ideally within 30 days of delivery, and do not post it back until we reply. We test returned products: if it works correctly, or the problem came from fitting, setup or not following the instructions, we send it back to you and you pay the freight both ways. Your rights under the Australian Consumer Law still apply. Full details: Refund policy.