Ford Everest UA

Ford Everest UA/UA2 Throttle Controller (2016–2022) | Roar 4X4

Roar 4X4

✓ Confirmed Compatible — Plug Type: 715
$169.00

Free shipping on throttle controllers.

  • AI Learning
  • 6 modes Γ— 9 levels
  • Plug & play
  • Plug 715

Check your plug: fitment depends on the vehicle. Before ordering, check the plug on the back of your accelerator pedal (this kit uses plug 715). Not sure? Email admin@roar4x4.com a photo of your plug.

✓ Australian Owned & Operated

YES IT FITS β€” Ford Everest UA/UA2 Throttle Controller (2016–2022) | Roar 4X4Β· Plug 715

Features

  • AI Learning
  • 6 driving modes Γ— 9 sensitivity levels
  • Plug & play β€” no ECU flash
  • Overtake / anti-theft modes
  • Day/night auto-dim display

What’s in the box

  • Throttle controller unit
  • Vehicle loom(plug 715)
  • Dash mount
  • Instructions
🔒 Secure Checkout🚚 Fast Dispatch📨 Online Support

Ford Everest UA2 (2016–2022) Throttle Controller

The Ford Everest UA2 (2016–2022) uses electronic throttle control, so a factory-programmed delay sits between the accelerator and the engine. You notice it most when merging, overtaking, towing or driving off-road. This Everest UA throttle controller is the Roar 4X4 Performance Throttle Controller for that vehicle: plug type 715, plug and play with no wiring. Setup is a very simple plug-and-play process. It is designed for touring and towing, on-road and off-road.

Product Specifications

Brand Roar 4X4
Suits Ford Everest UA2 (2016–2022)
Type Performance Throttle Controller
Plug Type 715
Installation Plug & Play β€” No Wiring Required
Setup A very simple plug-and-play process
Driving Modes 6 Modes + 9 Sensitivity Levels

Vehicle Compatibility β€” Does This Fit My Everest UA2?

Make Model Year Range Plug Type Compatible
Ford Everest UA2 2016–2022 715 βœ… YES β€” IT FITS

Check the compatibility table above to confirm this throttle controller fits your exact vehicle. Not listed? Contact our team or use our Vehicle Compatibility Finder.

Key Features

  • βœ… Sharper Pedal Response: reduces the delay you feel when you press the pedal
  • βœ… 6 Driving Modes β€” Economy, Off, Comfort, Sport, Race, and Auto to suit any driving condition
  • βœ… 9 Sensitivity Levels β€” Fine-tune throttle response to your exact preference
  • βœ… AI Learning Mode β€” Adapts to your driving style over time for optimal performance
  • βœ… Anti-Theft Security Mode β€” Limits throttle input to help deter unauthorised vehicle use
  • βœ… Day/Night Sensor β€” Auto-brightness control for safe, glare-free viewing
  • βœ… Transmission Settings β€” Manual (HHH) or Auto (AAA) modes for precise control
  • βœ… Quick Race Mode: long-press the M button to switch straight to Race Mode
  • βœ… 100% Plug & Play β€” No cutting, no splicing, no tools required. Plug Type 715 pre-matched for your Everest UA2

Why Fit a Throttle Controller to Your Ford Everest UA2?

Modern drive-by-wire vehicles like the Ford Everest UA2 use electronic throttle control, which introduces a factory-programmed delay between pressing the accelerator and engine response. You notice it most when merging, overtaking, towing, or driving off-road.

The Roar 4X4 Throttle Controller changes how the pedal signal is sent, so the pedal feels more responsive. It doesn't increase horsepower or torque. It changes how quickly the pedal responds. Sport and Race modes provide sharper response for overtaking and off-road driving.

What's in the Box

  • βœ… Roar 4X4 Performance Throttle Controller Unit β€” With LCD display
  • βœ… Vehicle-Specific Wiring Harness β€” Plug Type 715 for Ford Everest UA2
  • βœ… Mounting Bracket & Adhesive Pad β€” For dashboard mounting
  • βœ… Fitting Instructions β€” Universal installation guide

Confirm your plug β€” please check your plug type as per the picture

Before you install, match the plug-face photo in the gallery to the connector on your accelerator pedal. Pin layout, housing shape, and lock colour must match. Then download the installation instructions for verification. If you are unsure, contact support with a clear photo of your plug before ordering.

Plug type 715 β€” Ford Everest UA/UA2 Β· 2016–2022 β€” please match to confirm your vehicle
Plug type 715 β€” Ford Everest UA/UA2 Β· 2016–2022 β€” please match to confirm your vehicle. Check installation instructions (download for verification).
  • Please check your plug type as per the picture before install.
  • Unplug the pedal connector and compare pin layout / housing / lock colour.
  • Download installation instructions for verification: TC instruction manual (PDF).
  • If it does not match, or you are unsure, contact support with a clear photo of your plug.

Fitting Instructions β€” Throttle Controller Installation

πŸ”§ Setup is a very simple plug-and-play process. No tools required.

  1. Locate Throttle Pedal: Find the electronic connector on your Everest UA2's accelerator pedal β€” it's the plug at the top of the pedal.
  2. Plug In Controller: Disconnect the factory connector. Plug the Roar controller (Plug 715) between the pedal and factory harness.
  3. Mount & Drive: Secure the display on your dashboard. Start your Everest UA2 and select your preferred driving mode. Done!

Installation is the same for all vehicles β€” simply match the plug type to your accelerator pedal connector. No cutting, splicing, or tools required. Fully reversible β€” remove anytime to return to factory settings.

Frequently Asked Questions β€” Ford Everest UA2 Throttle Controller

How do I know Plug Type 715 is correct for my Everest UA2?

Plug Type 715 is confirmed compatible with the Ford Everest UA2 (2016–2022). The connector is specifically designed to match your vehicle's electronic throttle pedal. If you're unsure, contact our team with your vehicle details.

Does it increase power or just throttle response?

The throttle controller adjusts how quickly your Everest UA2's existing power is delivered β€” it does not increase horsepower or torque. It changes the pedal signal so the response feels quicker. Engine output does not change.

Can I use it while towing with my Everest UA2?

Absolutely. You can use Sport or Race mode while towing to get better response when merging, overtaking, or climbing hills.

Is it compatible with aftermarket ECU tunes or chips?

Yes. The throttle controller works independently of ECU tunes, performance chips, or exhaust modifications. It complements these upgrades by giving you finer control over throttle delivery.

What does Anti-Theft Mode do?

Anti-Theft Mode dramatically reduces throttle input, making the vehicle very difficult to drive. This provides an additional layer of security against unauthorised use of your Everest UA2.

Shipping & Returns

πŸ“¦ Shipping: Free shipping on throttle controllers within Australia. In-stock items typically dispatch within 2–5 business days. Allow 2–14 business days in transit depending on location. Australia only β€” we do not ship to P.O. boxes. Shipping for other products is calculated at checkout.

↩️ Returns: Change of mind: you can return this throttle controller within 30 days of delivery if it is in as-new condition (no scratches, grease or adhesive), complete and in its original packaging. You pay the return freight. If it arrives faulty, damaged or incorrect, email admin@roar4x4.com with your order number and photos, ideally within 30 days of delivery, and do not post it back until we reply. We test returned products: if it works correctly, or the problem came from fitting, setup or not following the instructions, we send it back to you and you pay the freight both ways. Your rights under the Australian Consumer Law still apply. Full details: Refund policy.

Fitting Instructions — Ford Everest UA/UA2 Throttle Controller (2016–2022) | Roar 4X4

1

Locate Throttle Pedal

Find the electronic connector on your accelerator pedal in the driver's footwell. It's the plug going into the top of the pedal.

2

Disconnect Factory Plug

Unplug the factory connector from the throttle pedal sensor. Press the release tab and pull gently.

3

Plug In Controller

Connect the Roar controller harness between the pedal sensor and the factory connector. It goes inline.

4

Route Display Cable

Route the display unit cable neatly along the centre console or dashboard to your preferred mounting location.

5

Mount Display Unit

Secure the display unit on your dashboard using the supplied adhesive mount. Choose a visible, accessible spot.

6

Start & Select Mode

Start your vehicle. The controller powers on automatically. Select your preferred driving mode and sensitivity level.

Setup is a very simple plug-and-play process · No tools required

Need Help?
Not Sure About Fitment?

Contact us with your vehicle details and we'll confirm compatibility.