
Ford Escape ZG/ZH Throttle Controller (2017–2023) | Roar 4X4
Roar 4X4
✓ Confirmed Compatible — Plug Type: 715Join the Roar VIP club free for future offers
Free shipping on throttle controllers.
- AI Learning
- 6 modes × 9 levels
- Plug & play
- Plug 715
Check your plug: fitment depends on the vehicle. Before ordering, check the plug on the back of your accelerator pedal (this kit uses plug 715). Not sure? Email admin@roar4x4.com a photo of your plug.
✓ Australian Owned & Operated
YES IT FITS — Ford Escape ZG/ZH Throttle Controller (2017–2023) | Roar 4X4· Plug 715
Features
- AI Learning
- 6 driving modes × 9 sensitivity levels
- Plug & play — no ECU flash
- Overtake / anti-theft modes
- Day/night auto-dim display
What’s in the box
- Throttle controller unit
- Vehicle loom(plug 715)
- Dash mount
- Instructions
Ford Escape ZG/ZH Throttle Controller (2017–2023) — Roar 4X4
Is this your Ford Escape ZG/ZH (2017–2023)?
Ford Escape ZG (2017–2020) and ZH (November 2020–2023) faces. ST-Line has different trim and bumpers; match the connector rather than the exterior face.
- Ford Escape ZG/ZH, 2017–2023. ZG arrived in Australia in early 2017; the Escape was discontinued at the end of 2023.
- 2017–2023 · All models · petrol and diesel
- Plug: Plug Type 715. The factory plug list gives Plug 715 for Ford Escape 2013 onwards, all engines.
Not this page: The earlier ZD/ZD facelift Escape uses a different year band. This page ends with the ZH runout.
Unlock the full potential of your Ford Escape ZG/ZH (2017–2023) with the Roar 4X4 Performance Throttle Controller. This plug-and-play unit reduces throttle lag and makes the pedal feel more responsive. Designed for everyday commuting, highway and country driving, this controller sharpens how your Escape responds on the road.
Product Specifications
| Brand | Roar 4X4 |
| Suits | Ford Escape ZG/ZH (2017–2023) |
| Type | Performance Throttle Controller |
| Plug Type | 715 |
| Installation | Plug & Play — No Wiring Required |
| Setup | a very simple plug-and-play process |
| Driving Modes | 6 Modes + 9 Sensitivity Levels |
| Warranty period | 12 months (see our Terms of service) |
Vehicle Compatibility — Does This Fit My Escape?
| Make | Model | Year Range | Plug Type | Compatible |
|---|---|---|---|---|
| Ford | Escape ZG/ZH | 2017–2023 | 715 | ✅ YES — IT FITS |
Check the compatibility table above to confirm this throttle controller fits your exact vehicle. Not listed? Contact our team or use our Vehicle Compatibility Finder.
Key Features
- ✅ Sharper Pedal Response: reduces the delay you feel when you press the pedal
- ✅ 6 Driving Modes — Economy, Off, Comfort, Sport, Race, and Auto to suit any driving condition
- ✅ 9 Sensitivity Levels — Fine-tune throttle response to your exact preference
- ✅ AI Learning Mode — Adapts to your driving style over time for optimal performance
- ✅ Anti-Theft Security Mode — Reduces throttle input to prevent unauthorised vehicle use
- ✅ Day/Night Sensor — Auto-brightness control for safe, glare-free viewing
- ✅ Transmission Settings — Manual (HHH) or Auto (AAA) modes for precise control
- ✅ Quick Race Mode: long-press the M button to switch straight to Race Mode
- ✅ 100% Plug & Play — No cutting, no splicing, no tools required. Plug Type 715 pre-matched for your Escape
Why Fit a Throttle Controller to Your Ford Escape ZG/ZH?
Modern drive-by-wire vehicles like the Ford Escape ZG/ZH use electronic throttle control, which introduces a factory-programmed delay between pressing the accelerator and engine response. This "throttle lag" is most noticeable when merging, overtaking or pulling away from the lights.
The Roar 4X4 Throttle Controller changes how the pedal signal is sent, so the pedal feels more responsive. It doesn't increase horsepower or torque. It changes how quickly the pedal responds.
What's in the Box
- ✅ Roar 4X4 Performance Throttle Controller Unit — With LCD display
- ✅ Vehicle-Specific Wiring Harness — Plug Type 715 for Ford Escape ZG/ZH
- ✅ Mounting Bracket & Adhesive Pad — For dashboard mounting
- ✅ Fitting Instructions — Universal installation guide
Confirm your plug — please check your plug type as per the picture
Before you install, match the plug-face photo in the gallery to the connector on your accelerator pedal. Pin layout, housing shape, and lock colour must match. Then download the installation instructions for verification. If you are unsure, contact support with a clear photo of your plug before ordering.

- Please check plug type according to your vehicle.
- Please check your plug type as per the picture before install.
- Unplug the pedal connector and compare pin layout / housing / lock colour.
- Download installation instructions for verification: TC instruction manual (PDF).
- If it does not match, or you are unsure, contact support with a clear photo of your plug.
Fitting Instructions — Throttle Controller Installation
Installation is a very simple plug-and-play process.
- Locate Throttle Pedal: Find the electronic connector on your Escape's accelerator pedal — it's the plug at the top of the pedal.
- Plug In Controller: Disconnect the factory connector. Plug the Roar controller (Plug 715) between the pedal and factory harness.
- Mount & Drive: Secure the display on your dashboard. Start your Escape and select your preferred driving mode. Done!
Installation is the same for all vehicles — simply match the plug type to your accelerator pedal connector. No cutting, splicing, or tools required. Fully reversible — remove anytime to return to factory settings.
Frequently Asked Questions — Ford Escape ZG/ZH Throttle Controller
How do I know Plug Type 715 is correct for my Escape?
Plug Type 715 is the factory-listed plug for the Ford Escape ZG/ZH (2017–2023). The connector is specifically designed to match your vehicle's electronic throttle pedal. Please check plug type according to your vehicle — if you're unsure, contact our team with your vehicle details and a photo of your pedal plug.
Does it increase power or just throttle response?
The throttle controller adjusts how quickly your Escape's existing power is delivered — it does not increase horsepower or torque. It changes the pedal signal so the response feels quicker. Engine output does not change.
Is it good for everyday driving in my Escape?
Yes. Many Escape owners use Sport mode for sharper response when merging and overtaking, and Economy mode on long highway drives to smooth out throttle delivery.
Is it compatible with aftermarket ECU tunes or chips?
Yes. The throttle controller works independently of ECU tunes, performance chips, or exhaust modifications. It complements these upgrades by giving you finer control over throttle delivery.
What does Anti-Theft Mode do?
Anti-Theft Mode dramatically reduces throttle input, making the vehicle very difficult to drive. This provides an additional layer of security against unauthorised use of your Escape.
Shipping & Returns
📦 Shipping: Free shipping on throttle controllers within Australia. In-stock items typically dispatch within 2–5 business days. Allow 2–14 business days in transit depending on location. Australia only — we do not ship to P.O. boxes. Shipping for other products is calculated at checkout.
↩️ Returns & Warranty: Covered by our 12-month warranty, in addition to your rights under Australian Consumer Law, which can continue after it ends. Change of mind: you can return this throttle controller within 30 days of delivery if it is in as-new condition (no scratches, grease or adhesive), complete and in its original packaging. You pay the return freight. If it arrives faulty, damaged or incorrect, email admin@roar4x4.com with your order number and photos, ideally within 30 days of delivery, and do not post it back until we reply. We test returned products: if it works correctly, or the problem came from fitting, setup or not following the instructions, we send it back to you and you pay the freight both ways. Your rights under the Australian Consumer Law still apply. Full details: Refund policy.
Fitting Instructions — Ford Escape ZG/ZH Throttle Controller (2017–2023) | Roar 4X4
Locate Throttle Pedal
Find the electronic connector on your accelerator pedal in the driver's footwell. It's the plug going into the top of the pedal.
Disconnect Factory Plug
Unplug the factory connector from the throttle pedal sensor. Press the release tab and pull gently.
Plug In Controller
Connect the Roar controller harness between the pedal sensor and the factory connector. It goes inline.
Route Display Cable
Route the display unit cable neatly along the centre console or dashboard to your preferred mounting location.
Mount Display Unit
Secure the display unit on your dashboard using the supplied adhesive mount. Choose a visible, accessible spot.
Start & Select Mode
Start your vehicle. The controller powers on automatically. Select your preferred driving mode and sensitivity level.
Setup is a very simple plug-and-play process · No tools required
Contact us with your vehicle details and we'll confirm compatibility.
Ford Escape ZG/ZH Throttle Controller (...
$169 normally $229
