ROAR 4X4 Throttle Controller – Plug 709 (multi-fit)
Roar 4x4
✓ Confirmed Compatible — Plug Type: familyFree shipping on throttle controllers.
- AI Learning
- 6 modes × 9 levels
- Plug & play
- Plug family
✓ Australian Owned & Operated
YES IT FITS — ROAR 4X4 Throttle Controller – Plug 709 (multi-fit)· Plug family
Features
- AI Learning
- 6 driving modes × 9 sensitivity levels
- Plug & play — no ECU flash
- Overtake / anti-theft modes
- Day/night auto-dim display
What’s in the box
- Throttle controller unit
- Vehicle loom(plug family)
- Dash mount
- Instructions
ROAR 4X4 Throttle Controller – Plug 709 (multi-fit)
Out of stock — coming soon. This plug type 709 throttle controller is published so you can confirm fitment and register interest. Inventory is currently zero (sold out). Contact us to order or to be notified when stock arrives.
Confirm your plug / match your plug
Before you install, unplug the connector on your accelerator pedal and match it to this photo. Pin layout, housing shape, and lock colour must match. If you are unsure, contact support with a clear photo of your plug before ordering.
- Unplug the pedal connector before install and compare it to this photo.
- Count the pins and note housing / lock colour (cream, yellow, red slide, etc.).
- If it does not match, or you are unsure, contact support with a clear photo of your plug.
Compatible vehicles (factory / TROS — plug 709)
- Honda: Brio (2011 onwards); BR-V (2016 onwards); City (2003-2014(4Th Gen/5Th Gen)); Civic (2012-2016(9Th Gen)); CRIDER (2013 onwards); Cr-Z (2010 onwards); ELYSION (2004-2015); Fit (2001-2014(1St Gen/2Nd Gen)); Freed (2008 onwards); INSIGHT (2010 onwards); Jade (2013 onwards); Jazz (2001-2014(1St Gen/2Nd Gen)); PILOT (2009 onwards)
Product Specifications
| Brand | Roar 4X4 |
| Product | Performance Throttle Controller |
| Plug type | 709 |
| Install | Plug-and-play at accelerator pedal |
| Availability | Out of stock — coming soon / contact to order |
Fitting Instructions — ROAR 4X4 Throttle Controller – Plug 709 (multi-fit)
Locate Throttle Pedal
Find the electronic connector on your accelerator pedal in the driver's footwell. It's the plug going into the top of the pedal.
Disconnect Factory Plug
Unplug the factory connector from the throttle pedal sensor. Press the release tab and pull gently.
Plug In Controller
Connect the Roar controller harness between the pedal sensor and the factory connector. It goes inline.
Route Display Cable
Route the display unit cable neatly along the centre console or dashboard to your preferred mounting location.
Mount Display Unit
Secure the display unit on your dashboard using the supplied adhesive mount. Choose a visible, accessible spot.
Start & Select Mode
Start your vehicle. The controller powers on automatically. Select your preferred driving mode and sensitivity level.
Estimated install time: 10-15 minutes · No tools required · 100% plug and play
Contact us with your vehicle details and we'll confirm compatibility.
ROAR 4X4 Throttle Controller – Plug 709...
$229.00